Filter By
Filter By
Home
Filter By
Sound Amplifiers
$3.95
(tax excl.)
TDA2003 is a monolithic 10w audio power amplifierFEATURES*Very low external component required.*High current output ( up to 3 A).*Low harmonic and crossover distortion.*Built-in Over temperature protection.*Short...
Other Parts
$9.75
(tax excl.)
Ms Pacman Aux Board Ribbon Cable New 40 pin Ribbon Cable Gold contacts Approx 11-12" to replace original.
Processors & 40 pin ICs
$7.95
(tax excl.)
Z80 DMA
PN Z8410B1
Direct Memory Access Controller
40 Pin DIP Package
Used on some Nintendo boards
Other Parts
$1.50
(tax excl.)
6 Pack of Nylon cable ties to secure the Sync Bus and Vram cards to Pac or Mspac pcb.
Crystals
$0.90
(tax excl.)
Crystal 18.432 MhzHC-49 PackageUsed on Pacman and many other arcade pcb's
TWA Repro Mfg.
$39.95
(tax excl.)
Reproduction Nintendo audio amp pcb used on sanyo monitors.
No modifications needed, installs exactly like original. Modern look with that classis Nintendo sound.
Replace your old failing amp or just keep one around...
Buttons & Switches
$4.79
(tax excl.)
Bally / Midway Reset pushbutton Direct replacment for reset pushbuttons used on many Bally/Midway boards including Pacman, Ms Pacman, Galaxian, Bally pinball, Williams system 3-6 mpu, etc.
Ram
$3.79
(tax excl.)
AM9101 / P2101
256x4 Static Ram22 Pin .4" DIP PackageUsed on many arcade pcbs such as Centipede & Millipede
C2101 / P2101
256X4 Static Ram
22 Pin .4" DIP PackageUsed on many arcade pcbs...
Fusible Resistors
$0.65
(tax excl.)
Nintendo Audio Amp R383 Resistor.
39 Ohm 1/4 watt fusible axial resistor.
Always check this resistor if your having problems with the sound amp on your Sanyo monitor!
Buttons & Switches
$1.15
(tax excl.)
Dip Switch -8 Position 16 Pin DIP Package
Just about every arcade pcb will have at least one of these on it.
Monitor components
$28.65
(tax excl.)
Sanyo 20EZ Remote Pot Kit.
This kit relocates the five pots from the rear of the monitor to a remote board. The remote board includes a detatchable 3 foot cable and can be mounted for easy access to the pots without...
Other Parts
$12.95
(tax excl.)
MsPacman Aux board mounting bracket.
This bracket mounts to the cab just to the right of the main pcb. It holds the aux board which is connected to the main board with a ribbon cable.
These are original used parts....
Other Parts
$2.19
(tax excl.)
10 Watt, 4 Ohm Power Resistor
Used in power supply section on Pacman PCB(R53).
Also used on MsPac, Galaxian and possibly others.
Joysticks and Controls
$0.95
(tax excl.)
Atari optic pcb hardware for trackball and spinners.
Includes two stainless steel screws and two lock nuts.
Used to mount tempest spinner optic pcb and missile command trackball pcb. May work on other controllers as...