Filter By
Filter By
Home
Filter By
Monitor components
$28.65
(tax excl.)
Sanyo 20EZ Remote Pot Kit.
This kit relocates the five pots from the rear of the monitor to a remote board. The remote board includes a detatchable 3 foot cable and can be mounted for easy access to the pots without...
Edge Connectors
$4.23
(tax excl.)
18/36 Pin Edge Connector SEC
This size connector is commonly used on many games such as Konami and a lot of bootleg boards.
Other Parts
$9.75
(tax excl.)
Ms Pacman Aux Board Ribbon Cable New 40 pin Ribbon Cable Gold contacts Approx 11-12" to replace original.
Edge Connectors
$2.45
(tax excl.)
10/20 Pin Edge Connector SEC
This size connector is commonly used on Atari games and others as well.
Other Parts
$1.50
(tax excl.)
6 Pack of Nylon cable ties to secure the Sync Bus and Vram cards to Pac or Mspac pcb.
Crystals
$0.90
(tax excl.)
Crystal 18.432 MhzHC-49 PackageUsed on Pacman and many other arcade pcb's
Buttons & Switches
$4.79
(tax excl.)
Bally / Midway Reset pushbutton Direct replacment for reset pushbuttons used on many Bally/Midway boards including Pacman, Ms Pacman, Galaxian, Bally pinball, Williams system 3-6 mpu, etc.
Buttons & Switches
$1.15
(tax excl.)
Dip Switch -8 Position 16 Pin DIP Package
Just about every arcade pcb will have at least one of these on it.
Other Parts
$12.95
(tax excl.)
MsPacman Aux board mounting bracket.
This bracket mounts to the cab just to the right of the main pcb. It holds the aux board which is connected to the main board with a ribbon cable.
These are original used parts....
Other Parts
$2.19
(tax excl.)
10 Watt, 4 Ohm Power Resistor
Used in power supply section on Pacman PCB(R53).
Also used on MsPac, Galaxian and possibly others.
Edge Connectors
$4.75
(tax excl.)
50/100 Solder Tail edge connector
PCB mounted, used on games such as professor pacman, gorf, wizard of wor and other midway card rack boards. *Note: the ram card on most of these games are narrow so you would have to...
Other Parts
$1.24
(tax excl.)
5 Watt, 50 Ohm Power Resistor.
Used in power supply section on Pacman PCB(R52).
Also used on MsPac, Galaxian and possibly others.
Home
$4.80
(tax excl.)
Jamma adapter PCB
Build your own Jamma adapter quick and easy by adding jumper wires to connect the pins.
Based off the popular JammaBoards JB-3 adapter.
Includes a spot for a 4 pin .100 header to use for Aux...