Filter By
Filter By
Home
Filter By
74ALS Series
$3.25
(tax excl.)
SN74ALS1244AN
Buffers & Line Drivers Octal Buffer/Driver With 3-State Outputs
20 Pin DIP Package
Buttons & Switches
$0.40
(tax excl.)
PCB Mount Pushbutton Switch 4 Pin DIP Package These work great for a galaga pcb reset if you clip two of the leads. Should work on other boards as well.
Other Parts
$9.75
(tax excl.)
Ms Pacman Aux Board Ribbon Cable New 40 pin Ribbon Cable Gold contacts Approx 11-12" to replace original.
74ALS Series
$0.90
(tax excl.)
74ALS273
Octal D-Type Positive-Edge-Triggered Flip-Flops with clear
20 Pin DIP Package
Other Parts
$1.50
(tax excl.)
6 Pack of Nylon cable ties to secure the Sync Bus and Vram cards to Pac or Mspac pcb.
Crystals
$0.90
(tax excl.)
Crystal 18.432 MhzHC-49 PackageUsed on Pacman and many other arcade pcb's
Knocker & Parts
$0.92
(tax excl.)
Q*Bert knocker coil replacment sleeve.
-If your knocker plunger is sticking you probably need a new sleeve.
Buttons & Switches
$4.79
(tax excl.)
Bally / Midway Reset pushbutton Direct replacment for reset pushbuttons used on many Bally/Midway boards including Pacman, Ms Pacman, Galaxian, Bally pinball, Williams system 3-6 mpu, etc.
Buttons & Switches
$1.15
(tax excl.)
Dip Switch -8 Position 16 Pin DIP Package
Just about every arcade pcb will have at least one of these on it.
Other Parts
$12.95
(tax excl.)
MsPacman Aux board mounting bracket.
This bracket mounts to the cab just to the right of the main pcb. It holds the aux board which is connected to the main board with a ribbon cable.
These are original used parts....
Buttons & Switches
$0.99
(tax excl.)
Williams pcb reset switch
This switch is a direct replacment for the reset switch on your williams cpu board.
Other Parts
$2.19
(tax excl.)
10 Watt, 4 Ohm Power Resistor
Used in power supply section on Pacman PCB(R53).
Also used on MsPac, Galaxian and possibly others.