Filter By
Filter By
Home
Filter By
Buttons & Switches
$4.79
(tax excl.)
Bally / Midway Reset pushbutton Direct replacment for reset pushbuttons used on many Bally/Midway boards including Pacman, Ms Pacman, Galaxian, Bally pinball, Williams system 3-6 mpu, etc.
Buttons & Switches
$0.40
(tax excl.)
PCB Mount Pushbutton Switch 4 Pin DIP Package These work great for a galaga pcb reset if you clip two of the leads. Should work on other boards as well.
Fusible Resistors
$0.65
(tax excl.)
Nintendo Audio Amp R383 Resistor.
39 Ohm 1/4 watt fusible axial resistor.
Always check this resistor if your having problems with the sound amp on your Sanyo monitor!
Tools & Supplies
$5.95
(tax excl.)
Economy 5 inch Flush Cutter Pliers. Cuts up to 1mm Copper and other soft wires. 48 HRC Hardness.These are an absolute must-have in any electronics toolbox! Handle color may vary.
Buttons & Switches
$1.15
(tax excl.)
Dip Switch -8 Position 16 Pin DIP Package
Just about every arcade pcb will have at least one of these on it.
ICB & Zeke's Peke
$3.75
(tax excl.)
Taito Ice Cold Beer PCB Cap Kit
Contains all 5 electrolytic caps found on the cpu board.
ICB & Zeke's Peke
$2.25
(tax excl.)
Resistor upgrade kit for Taito Ice Cold Beer or Zeke's Peke pcb.
Resistors R20-R26 were under-rated (1/2w) on these boards and are commonly burned. Kit includes seven 1 watt resistors.
Tools & Supplies
$4.19
(tax excl.)
Nylon bristle scratch brush.
Similar to the fiberglass brush but is less abrasive.
*Note: not refillable.
Buttons & Switches
$0.99
(tax excl.)
Williams pcb reset switch
This switch is a direct replacment for the reset switch on your williams cpu board.
Tools & Supplies
$2.75
(tax excl.)
Quality aluminum handle hobby knife.
Uses standard Xacto replacment blades.
Includes blade cover and 5 extra blades.